[Initial Window]

3D | C | D | L | M | R | S | T

The [Initial Window] section of the Image.ini file determines whether certain Imagenation window elements and floating windows appear automatically when you start Imagenation. It also defines the size and location of the Imagenation window itself. If "Save=1" in this section, all of the keynames in it are saved on quit.

Ignored keynames

3D Measurement Tool Angular Units = units

Purpose	Defines the units for measuring Arc and Angle for a 3D model.
To Change	Use the Units drop down list in the 3D Measurement Tools window (3D $image\lgarrow_shg.gif$ 3D Measurement Tools).
Values	deg
	rad
Default	deg
Editions	Imagenation 3D+ only

3D Measurement Tool Linear Units = units

Purpose	Defines the units for measuring Face Surface, Edge Length, Vertex Coordinates, Arc, Distance or Minimum Distance for a 3D model.
To Change	Use the Units drop down list in the 3D Measurement Tools window (3D $image\lgarrow_shg.gif$ 3D Measurement Tools).
Values	in
	mm
	cm
	m
	ft
Default	in
Notes	This keyname is no longer actively used in Imagenation.
Editions	Imagenation 3D+ only

3D Measurement Tool Window = 0 | 1

Purpose	Defines whether the 3D Measurement Tools window is displayed.
To Change	Use the 3D $image\lgarrow_shg.gif$ 3D Measurement Tools command.
Values	0 = do not display the 3D Measurement Tools window
	1 = display the 3D Measurement Tools window
Default	0
Editions	Imagenation 3D+ only

3D Measurement Tool Window Rect = =value, value, value, value

Purpose	Defines the location of the 3D Measurement Tools window.
To Change	Move the 3D Measurement Tools window.
Editions	Imagenation 3D+ only

Cross-Section Window=0 | 1

Purpose	Defines whether the Cross-Section window is displayed.
To Change	Use the Preference $image\lgarrow_shg.gif$ Cross-Section command.
Values	0 = do not display the Cross-Section window
	1 = display the Cross-Section window
Default	0
Editions	Available for Windows Large formats with 3D only

Cross-Section Window Rect=value, value, value, value

Purpose	Defines the location of the Cross-Section window.
To Change	Move the Cross-Section window.
Editions	Available for Windows Large formats with 3D only

Detail Window=0 | 1

Purpose	Defines whether the Detail window is displayed.
To Change	Use the Preference $image\lgarrow_shg.gif$ Detail command.
Values	0 = do not display the Detail window
	1 = display the Detail window
Default	0
Editions	All

Layer Compare Window Rect=value, value, value, value

Purpose	Defines the location and size of the Layer Compare dialog box.
To Change	Move or resize the Layer Compare dialog box (Layer $image\lgarrow_shg.gif$ Compare).
Editions	All except Office-View-Annotate and Scan-View-Edit

Layers Window=0 | 1

Purpose	Defines whether the Layers window is displayed by default when a document is opened.
To Change	Edit the Image.ini file.
Values	0 = do not display the Layers window
	1 = display the Layers window
Default	0
Note	Displaying or hiding the Layers window with the menu (Preference $image\lgarrow_shg.gif$ Layers) or toolbar commands does not overwrite this INI setting.
Editions	All except Office-View-Annotate and Scan-View-Edit

Line Width Window=0 | 1

Purpose	Defines whether the Line Width window is displayed.
To Change	Use the Preference $image\lgarrow_shg.gif$ Line Width command.
Values	0 = do not display the Line Width window.
	1 = display the Line Width window.
Default	0
Editions	All except View and Office-View-Annotate

Line Width Window Rect=value, value, value, value

Purpose	Defines the location and the size of the Line Width window.
To Change	Move or resize the Line Width window.
Editions	All except View and Office-View-Annotate

Measurement Window=0 | 1

Purpose	Defines whether the Measurements window is displayed by default when a document is opened.
To Change	Edit the Image.ini file.
Values	0 = do not display the Measurements window.
	1 = display the Measurements window.
Default	0
Note	Displaying or hiding the Measurements window with the menu (Preference $image\lgarrow_shg.gif$ Measurements) or toolbar commands does not overwrite this INI setting.
Editions	All except Office-View-Annotate and View-Markup

Measurement Window Angular Units=units

Purpose	Defines the units to display the angle values in.
To Change	Choose new units in the Measurements window. (Right click in the window to get the menu.)
Values	deg = degrees
	rad = radians
Default	deg
Editions	All except Office-View-Annotate and View-Markup

Measurement Window Linear Units=units

Purpose	Defines the units to display the length and area values in.
To Change	Choose new units in the Measurements window menu.
Values	in = inches
	ft = feet
	mm =millimetres
	cm = centimetres
	m = metres
	pts = points
	twips = twips
Default	in
Editions	All except Office-View-Annotate and View-Markup

Model Explorer Window=0 | 1

Purpose	Defines whether the Model Explorer window is displayed by default when a document is opened.
To Change	Edit the Image.ini file.
Values	0 = do not display the Model Explorer window.
	1 = display the Model Explorer window.
Default	0
Note	Displaying or hiding the Model Explorer window with the menu (3D $image\lgarrow_shg.gif$ Model Explorer) or toolbar commands does not overwrite this INI setting.
Editions	Imagenation 3D+ only

Reference Window=0 | 1

Purpose	Defines whether the Reference window is displayed
To Change	Use the Preference $image\lgarrow_shg.gif$ Reference command.
Values	0 = do not display the Reference window.
	1 = display the Reference window.
Default	0
Editions	All except Office-View-Annotate and View-Markup

Save=0 | 1

Purpose	When set to 1, all the other keynames in this section are saved on quit.
To Change	Edit the Image.ini file.
Values	0 = do not save settings on quit.
	1 = save settings on quit.
Default	1
Editions	All

Single Line Edit Rect=value, value, value, value

To Change	Move or resize the Hotspot Data dialog box, when displayed with a single-line text box.
See also	Hotspot Single Line Edit keyname, [Tool] section

Status=0 | 1

Purpose	Defines whether the Status Bar is displayed.
To Change	Use the Preference $image\lgarrow_shg.gif$ Status Bar command.
Values	0 = do not display the Status Bar.
	1 = display the Status Bar
Default	1
Editions	All

Symbol Window=0 | 1

Purpose	Defines whether the Symbol window is displayed.
To Change	Use the Preference $image\lgarrow_shg.gif$ Symbol Palette command.
Values	0 = do not display the Symbol window
	1 = display the Symbol window.
Default	0
Editions	View-Markup, View-Markup-Edit, and Scan-View-Markup-Edit

Symbol Window Rect=value, value, value, value

Purpose	Defines the location and the size of the Symbol window.
To Change	Move or resize the Symbols palette.
Editions	View-Markup, View-Markup-Edit, and Scan-View-Markup-Edit

Text Search Window=0 | 1

Purpose	Defines whether the Find dialog box is displayed.
To Change	Use the Edit $image\lgarrow_shg.gif$ Find command.
Values	0 = do not display the Find dialog box.
	1 = display the Find dialog box.
Default	0
Editions	All

Thumbnails Window=0 | 1

Purpose	Defines whether the Thumbnails window is displayed by default when a document is opened.
To Change	Edit the Image.ini file.
Values	0 = do not display the Thumbnails window.
	1 = display the Thumbnails window.
Default	0
Note	Displaying or hiding the Thumbnails window with the menu (Preference $image\lgarrow_shg.gif$ Thumbnails) or toolbar commands does not overwrite this INI setting.
Editions	All

Thumbnails Window Display Mode=1 | 2 | 3

Purpose	Defines the display mode (Horizontal, Vertical, or Tiled) of the Thumbnails window.
To Change	Choose an option from the Thumbnails window menu. Right click in the window to get the menu.
Values	1 = Horizontal
	2 = Vertical
	3 = Tiled
Default	1
Editions	All

Thumbnails Window Page Load Mode=1 | 2

Purpose	Defines whether a preview of all pages is shown.
To Change	Use the "Display loaded pages" command in the Thumbnails window menu.
Values	1 = do not show page preview.
	2 = show page preview.
Default	2
Editions	All except Office-View-Annotate and Scan-View-Edit

Thumbnails Window Thumbnail Size=size units

Purpose	Defines the size of the Thumbnails.
To Change	Resize the Thumbnails window, or change the display option.
Default	1 in
Editions	All

Transformation Window=0 | 1

Purpose	Defines whether the Transformations window is displayed.
To Change	Use the 3D $image\lgarrow_shg.gif$ Transformations command.
Values	0 = do not display the Transformations window.
	1 = display the Transformations window.
Default	0
Editions	Imagenation 3D+ only.

Transformation Window Rect=value, value, value, value

Purpose	Defines the location and size of the Transformations window.
To Change	Move or resize the Tranformations window.
Editions	Imagenation 3D+ only.