[3D]

3D | D | L | R | S | T

This section defines the default appearance and behaviour of 3D documents.

3D

3D Dimension Markup Color= RRR,GGG,BBB

Purpose	Defines the default color for dimension markups on a 3D model.
To Change	Use the "Dimension Markup: Color" list in the Display Settings category (Preference $image\lgarrow_shg.gif$ Options, $image\plus_shg.gif$ 3D, Display Settings).
Values	Any combination of a red value (0 to 255), a green value (0 to 255), and a blue value (0 to 255), each separated by a comma, where 0 means no color and 255 means the maximum amount of that color. Windows color tip
Default	255, 0, 0 (Red)
Editions	Imagenation 3D+ only

3D Text Markup Color= RRR,GGG,BBB

Purpose	Defines the default color for text markups on a 3D model.
To Change	Use the "Text Markup Color" list in the Display Settings category (Preference $image\lgarrow_shg.gif$ Options, $image\plus_shg.gif$ 3D, Display Settings).
Values	Any combination of a red value (0 to 255), a green value (0 to 255), and a blue value (0 to 255), each separated by a comma, where 0 means no color and 255 means the maximum amount of that color. Windows color tip
Default	255, 0, 0 (Red)
Editions	Imagenation 3D+ only

3D Vertex Color= RRR,GGG,BBB

Purpose	Defines the color of vertex points on a 3D model, when displayed in 3D dimension mode or certain 3D measurement modes.
To Change	Use the "Vertex: Color" list in the Display Settings category (Preference $image\lgarrow_shg.gif$ Options, $image\plus_shg.gif$ 3D, Display Settings).
Values	Any combination of a red value (0 to 255), a green value (0 to 255), and a blue value (0 to 255), each separated by a comma, where 0 means no color and 255 means the maximum amount of that color. Windows color tip
Default	255, 255, 0 (Yellow)
Editions	Imagenation 3D+ only

3D Vertex Size= 0 | 1 | 2

Purpose	Defines the size of vertex points on a 3D model, when displayed in 3D dimension mode or certain 3D measurement modes.
To Change	Use the "Vertex: Size" list in the Display Settings category (Preference $image\lgarrow_shg.gif$ Options, $image\plus_shg.gif$ 3D, Display Settings).
Values	0 = Small
	1 = Medium
	2 = Large
Default	1
Editions	Imagenation 3D+ only

D

Display Face Information = 0 | 1

Purpose	Defines whether or not to display faces of parts in the Model Explorer.
To Change	Use the "Display Face Info" check box in the Tools category (Preference $image\lgarrow_shg.gif$ Options, $image\plus_shg.gif$ 3D, Tools).
Values	0 = Do not display faces
	1 = Display faces
Default	1
Editions	Imagenation 3D+ only

L

Linear Measurement Unit= 1 | 2 | 3 | 4 | 5

Purpose	Defines the default units for linear measuring of 3D models.
To Change	Use the Measurements option in the Tools category (Preference $image\lgarrow_shg.gif$ Options, $image\plus_shg.gif$ 3D, Tools).
Values	1 = in
	2 = cm
	3 = mm
	4 = m
	5 = ft
Default	3
Editions	All

R

Rotation Step = step value

Purpose	Defines the number of degrees or radians for each step in the rotation of a 3D model or part through the Transformations window.
To Change	Use the Rotate Step text box in the Tools category (Preference $image\lgarrow_shg.gif$ Options, $image\plus_shg.gif$ 3D, Tools).
Values	number of degrees (0 to 360) or radians (0 to 6.28318531)
Default	45
Editions	Imagenation 3D+ only

Rotation Step Units = units

Purpose	Defines the units for the Rotation Step value.
To Change	Use the Rotate Step units drop down box in the Tools category (Preference $image\lgarrow_shg.gif$ Options, $image\plus_shg.gif$ 3D, Tools).
Values	16 = degrees
	17 = radians
Default	16
Editions	Imagenation 3D+ only

S

Scale Step = scale value

Purpose	Defines the zoom step factor for zooming in and out on a 3D model or part through the Transformations window.
To Change	Use the Scale Factor box in the Tools category (Preference $image\lgarrow_shg.gif$ Options, $image\plus_shg.gif$ 3D, Tools).
Values	integer values
Default	1.2
Editions	Imagenation 3D+ only

T

Translation Step = step value

Purpose	Defines the step value for translations on 3D models or parts through the Transformations window.
To Change	Use the Translate Step text box in the Tools category (Preference $image\lgarrow_shg.gif$ Options, $image\plus_shg.gif$ 3D, Tools).
Values	integer values
Default	1
Editions	Imagenation 3D+ only

Translation Step Units = integer

Purpose	Defines the units for the Translate Step value.
To Change	Use the Translate Step units drop down box in the Tools category (Preference $image\lgarrow_shg.gif$ Options, $image\plus_shg.gif$ 3D, Tools).
Values	1 = in
	2 = cm
	3 = mm
	4 = m
	5 = ft
Default	1
Editions	Imagenation 3D+ only